We chose the concealed mixer because it is more trendy. You can then take a hot shower and relax on the modular sofa or OEM pouf. It is clear that the shower's purpose is vital. Why should we hide the shower in our bathroom?
What is CONCEAL SHOWER?
The entire pipe for the concealed shower is embedded into the wall. There is only one nozzle/switch outside. This bathroom is small and simple, so it's ideal for smaller bathrooms. The bathroom is small, and the water pipe runs into the wall. This saves space, which makes the bathroom look spacious and beautiful.
WHY INSTALL A CONCEALED SHOWER?
Aesthetics: Conceal shower > Integral shower
Open installation is the preferred method for installing the integral shower. This means that the pipe fittings of the shower are visible, so visual effects can be greatly reduced. Hidden showers are hidden. The pipe is hidden in the wall. The only thing that is visible outside the wall is the valve and shower nozzle, which is both beautiful and atmospheric.
Space-saving: Conceal Shower > Integral Shower
The concealed shower's hardware fittings are concealed in the wall. They will not take up too much bathroom space. The integral shower, with its more visible fittings, takes up more space in the bathroom, making people feel less active and depressed.
Maintenance: Conceal and integrated showers
This is why conceal showers are not very popular. Accessories are located in the wall. The shower can become a real problem if it becomes too difficult to maintain. An integral shower will help you save time and worry.
INSTALLATION METHOD FOR CONCEALING SHOWER
It is very easy to see that all pipes are concealed in the wall and that only the water control handle is kept outside of the wall. During installation, there are many things to be aware of.
The first is to not place the hot and cold water supply pipes upside-down. There are usually two signs on the faucet. If no sign is visible, the hot water pipe is on the left and the cold water pipe is on the right.
It is also a good idea to first remove the showerhead and foaming device from the installation. Then let the water flow through the pipe and wash off any impurities.
Do not wrap the sealing tape when you connect the sprinkler water supply hose. To prevent damage to the hose, tighten the nut with your hands.
Fourth, don't forget to take out any plastic parts, such as the valve core, before heating welding,
The embed depth of the faucet must be measured before it enters the wall. A pressure test on the faucet's connection section shall be done to determine if there is any leakage or repair it. Do not forget to empty the faucet and pipeline of any air during the pressure test.
HOW DO YOU CHOOSE A SHOWER
Take a look at the surface coating
150-degree chromium plating is recommended for shower surfaces. It will withstand high temperatures for up to 1 hour without blistering or wrinkling and it will not corrode, even after being monitored with acetic acid salt spray for 24hrs. Hence, it is important to check the shower's gloss and smoothness before you buy. A smooth and bright shower is a sign of better quality.
Take a look at the spray effect
Showers can look similar in appearance and form, so make sure you check the spraying effects before making your selection. A well-designed shower will ensure that each orifice sprays evenly. You can also test the water flow to make sure it is consistent.
Take a look at the accessories
Shower accessories directly impact the shower's comfort. You can inspect the flexibility of the water pipe and lifting rod before you buy. Also, check whether the sprinkler connection has anti-twist ball bearings. Check if the lifting rod has a rotary controller.
Take a look at the spool
The valve core will directly affect the shower's service life. A ceramic core is a good choice for a shower. It is both smooth and frictionless. You can twist the switch manually to make it more comfortable when you select. It is possible to keep the shower running smoothly and reliable if it is smooth.
No comments:
Post a Comment